“Alea iacta est.” (‘The die is cast.’)
– Julius Caesar, according to Suetonius, in
Vita Divi Iuli, 121 CE, paragraph 33
The hallway stretches ahead for thirty feet, where it ends at a set of large, ornate double doors.
“I Perception to check for traps”, the rogue declares as she casts the die. It’s a 3. “Damn it!” she curses. She turns to you and asks the dreaded question. “Can I use my passive Perception instead?”
Passive checks are a relatively recent addition to D&D, only appearing with the edition that shall not be named. At first glance, they make a valuable tool. They allow the DM to resolve many issues that would be complicated by having to ask a player to make a roll, such as in the case of tipping one’s hand by asking for a Wisdom (Perception) check to notice a goblin sneaking by or calling for a Wisdom (Insight) check to see if the character discerns that an NPC is not being entirely truthful. They also offer a reasonable mechanic for approximating someone’s average attentiveness, learning, physical ability, experience, and luck.
However, in many ways they also make dice rolling a seemingly-redundant mechanic in D&D, and can cause considerable frustration in a game when they are misunderstood or misused.
This article will present some guidelines for using passive vs. active skill checks in accordance with the rules written in the official books as well as how the developers have made recommendations through Sage Advice and identify why there is so much confusion about how skills are supposed to work.
Quick, before you read on: we kindly ask that you consider white listing our domain with AdBlock. We don’t run ads that play audio or that aren’t vetted to be free of malicious code, but we do earn money from ads, and that is part of how we keep running.
Alternatively, you can become a patron on our Patreon and browse guilt-free!
What Are Passive Skill Checks?
A passive skill check (usually called a passive score) is a skill check that you don’t roll. It is calculated as 10 + all modifiers that normally apply to the check. To put it in other words, it’s your average result for that skill check, used by the DM in place of asking you to make a relevant skill check. A DM might call on you to make an active Wisdom (Perception) check when you want to look around the room for treasure, while at the same time comparing your passive Wisdom (Perception) to what the hidden goblin behind the curtain rolled for their Dexterity (Stealth) check. The emphasis here is with “the DM” because…
Passive Skill Checks Are A DM Tool
These exact words are often repeated in Sage Advice, though they don’t explicitly answer the question that they are intended to respond to. To put the meaning of these words more clearly: a player does not use their passive score, a DM will use your passive scores for you.
This confusion is part of a larger misunderstanding about how skills are used in D&D. Many people erroneously believe that they can simply use this skill or that skill whenever they choose, when in fact…
It is the DM Who Determines Whether a Skill Check is Needed
Ideally, players should never be saying “I use this game mechanic or that game mechanic” outside of combat. Players should play their characters, not their character sheets. It is all well and good for a player to describe, in character, that they use their expertise with the arcane to attempt identification of a magical effect (an Arcana check), or they focus their keen elven senses to hone in on the space occupied by an invisible creature (Perception check/the Search action), or some other similar action, but it is the DM who decides when and if a dice roll should occur as part of that. Your character doesn’t know what their skill bonuses are, and so your +6 bonus to Stealth shouldn’t exist for you unless your DM explicitly calls for it (you should just be reasonably assured that you can move about silently).
For example, in the brief exchange shown in the introduction of this article, the rogue was actually out of turn to decide that she was going to roll a Wisdom (Perception) check. The same goes for a player who wants to roll a Wisdom (Survival) check to track a creature, or an Intelligence (Arcana) check to recall lore on a monstrosity, or even a Charisma (Intimidate) check to get the captive servant to divulge sensitive details about the countess’ secret dealings. It’s not that these aren’t the correct uses of the skills, it’s that their DM has to call for them first. It is easy for players to get accustomed to the most common uses for skills and leap to simply using them in place of roleplaying. This should be actively discouraged in order that players do not get into the bad habit of thinking with their skills and not thinking with their characters. “I growl that the young page should give up the name of Lady Delia’s new paramour before I have to rip the words out of his throat” is how a player should present their Charisma (Intimidate) check, not “I roll an 18 to Intimidate!”… especially if your DM didn’t ask you to roll anything.
A more appropriate way for the introductory scenario of this article to develop would be as follows:
The hallway stretches ahead for thirty feet, where it ends at a set of large, ornate double doors.
“I cautiously move down the hall toward the doors”, the rogue says.
The DM nods, and consults a sheet behind his screen where he has recorded all of the characters’ most important passive scores. He notes that the rogue’s passive Investigation is 14, not quite high enough to spot the pressure plate cleverly hidden in the floor (DC 15). The DM also notes that the elven wizard’s passive Perception is 16, which is high enough to notice the smell of sulphur from the flame trap, but the wizard isn’t in the front rank and therefore isn’t close enough.
“You begin approaching the doors”, the DM describes.
“Do I notice anything?” the rogue asks.
“A lot of things, yes”, the DM says. “Is there something you’re watching out for in particular?”
“Hmm”, the rogue thinks. “I’d like to pay attention for any of the regular signs of kobold traps, as far as I’m familiar with them.”
“Okay”, the DM nods. “Give me an Intelligence (Investigation) check.”
“Not a Perception check?”
“Perception is for things like hearing through a door, finding the source of a smell, noticing a leopard crouching in a bush… you’re looking for small details in your surroundings, so I’m calling for Investigation.”
“That makes sense”, the rogue concedes. She rolls the check and gets 17.
“Right in front of you, there’s a stone section in the floor that is ever so slightly higher than those around it. The edges are worn and the grout seems deliberately cut aroudn the tile.You deduce that this piece is designed to be depressed by the weight of a passing creature.”
“A pressure plate”, the rogue surmises. “Can I see what it triggers?”
“Yes. Looking around, you notice a series of nozzles recessed into the walls and ceiling of the corridor immediately past the pressure plate. Cautiously leaning towards one, you catch a faint, acrid whiff. It’s not a smell that you can identify, but you know that you’ve smelt it before as it immediately reminds you of that time you were nearly incinerated by a fireball.”
“I’ve started moving up to see if the rogue needs help”, the wizard says. “Do I recognize it?”
“You do”, the DM confirms for the wizard who has proficiency in alchemy tools. “It’s sulphur. From this, you all can deduce that this is a flame trap that unleashes gouts of fire on this whole section of the corridor when the pressure plate is pushed.”
“Wait”, the fighter interjects, “I thought were beneath some kobold fortress? They have well-engineered traps? They can hardly put together decent weapons!”
“I’m starting to think that there’s something else going on here”, the wizard says darkly. “We should be on the lookout for other surprises.”
In this scenario, we see a few things handled more appropriately than in the scene at this article’s introduction. Most significantly, the DM used the rogue’s passive scores until such a time as the rogue indicated a specific action that could be resolved by a single die roll, which the DM specifically called for before it was rolled. It is important to note that the rogue wouldn’t necessarily have been able to coast by on their passive score if they had rolled poorly, but rather would have suffered consequences for not rolling well on their check—perhaps by gaining a false clue that misleads them (“the floor tile looks newer, probably a replacement for one that broke. Someone seems to be taking care of the place.”). Additionally, had the rogue’s passive score been high enough to notice the trap, the DM would have only been obliged to reveal that the floor tile seemed strange at first glance, with no additional details provided. Remember, it’s a passive score; it’s what you notice without taking a close look at something.
A further note about this scenario is that it also shows the difference between a Wisdom (Perception) and an Intelligence (Investigation) check, which is something that can sometimes confuse even veteran players who are accustomed to the two being part of the same skill (Search in Third Edition and Perception in the edition that shall not be named). They are two separate skills which many players and DMs often don’t realize they have conflated. Perception measures percipience and general awareness, and Investigation measures comprehension and deductive reasoning. They have vastly different applications.
Passive Scores and Minimum Results
Rarely does a week go by without us seeing the question ‘Can I roll lower than my passive Perception?’ or some other variation thereof. The answer to this is more complicated than a simple ‘yes’ or ‘no’, because it is a question that comes with a whole host of other factors.
As we clarified above, there is a clear distinction that the developers emphasize between active and passive checks (see here), and a strong emphasis on the passive score being something that the DM uses (see here). That being said, whether or not the rogue in the first scenario we presented could call on their passive Perception score as a minimum result is, in the words of Jeremy Crawford, “entirely up to the DM”.
But before you run back to your DM to say that the developers said it was okay, you have to remember that this is the exact response that the developers offer whenever they cannot point to any written rule that supports it. To put it another way, it is a roundabout way of saying “Sure, if you want to completely invalidate the whole purpose of a rogue’s Reliable Talent feature, we can’t see a rule that says you can’t do that”. We at Dungeon Master’s Workshop don’t recommend allowing passive scores as minimums, as it takes away from the rogue class and—more importantly—we have never heard of it improving gameplay. In fact, it eliminates a significant chance of failure on active rolls and puts much of the game on ‘easy mode’.
For DMs with players attempting to ‘abuse’ the passive score mechanic, we recommend making the official decision that rolling the die means that the player is making an active check, and therefore they cannot benefit from their passive. This is appropriate when, say, searching a room (as opposed to just passively noticing the features that are out in the open). If the player rolls terribly, that’s on them. Alea iacta est. There is no appealing to an arbitrary minimum for active rolls; they have to employ other game features such as the Lucky feat or Inspiration to escape their fate. Let the existing game mechanics serve the functions they were designed to accomplish.
There is a reason why the developers don’t commit a ‘yes’ or ‘no’ to many questions about skill checks and passives: every table is different. The advice that we have offered here is based on our best experiences following the rules as they are intended, but that is not to say that you could not develop another arrangement that works. Every game is different, and sometimes the rules need to simply be thrown out.
For instance, there are some occasions where the players are excited and know the skill the DM will ask them to roll. When two party members are asked to roll a Strength (Athletics) check to leap over a pit, the third party member who is paying attention will know what’s coming and quite possibly preempt the request. It’s not necessarily a bad thing for players to be ready with the roll in those circumstances, and you don’t want to stomp all over your players for being diligent. If conflict should arise, it will likely be because of a difference in interpretation of a certain action. (“No, no. I flip over the pit. You know, acrobatically.” … “That’s all well and good, but you’re aiming for distance, not style. It’s a test of athletics to make the jump, so that’s the check I’m calling for.”) In such a circumstance, it falls to DM discretion to balance the task against the execution. We recommend rewarding player creativity, as long as it doesn’t stretch the imagination too far.
Do you have a notable experience with skill checks? Are you still confused about what any of this even means? Leave a comment below!
If you would like to receive e-mail notifications of new posts, feel free to subscribe to the Dungeon Master’s Workshop Newsletter below.
Feature Image: Ambush, artist unknown (contact us!)